Lisa_F

Kathie I am so sorry to hear about your loss. Please accept my heartfelt sympathy during this difficult time and know that your Greenleaf family is holding you close in their hearts.

You're in great company on this forum and there's nothing wrong with you that acquiring a new kit (or three) won't fix! When I start window shopping for new kits / shells, I prefer to think of it as "research" and "inspiration" and when I find myself adding a new kit to my stash, I tell my DH that I'm planning for retirement

And here are the starts to our Glencrofts in all their glory Mine definitely isn't much to look at yet. Just the first floor with the back edge/stair part glued on. Had a heck of a time getting it to glue on straight because it was a little warped, so to fix the problem (and not have to sit and hold the two pieces while the glue dried) I taped it all to the straight edge of my kitchen counter! lol! Sounds & looks funny, but it worked Doesn't look like I accomplished much, but not pictured is the work I did cutting the front door opening bigger (using a different door) and filling in a few things like the side bathroom window. Kelly on the other hand got quite a bit of her shell glued together before we called it a day. I guess there's something to be said for ignoring directions & just winging it!

Just popping in with a big Thank You! to Jenn for making the Glencroft available to forum members. Rodentraiser / Kelly (best friend ever) knew I'd been obsessing over considering the Glencroft for awhile & she made the trip to get it to surprise me with it for Christmas (and what a surprise it was!!!). Turns out Kelly & I will both be working on Glencrofts together in 2016 - and I'm over the top excited about it! So thank you Jenn, for making it available, and thank you Kelly for knowing just what I needed to put a smile back on my face & get me excited about miniatures again!

Glue & a roll of paper towels (to wipe up the glue that may ooze out when you join two pieces of wood together. Congrats on the Glencroft! I'm going to be starting one soon too!

Truer words were never spoken!

This sounds like a grand idea! What a great way to encourage creative play! We built a "super hero headquarters" for my sons when they were little & they spent many happy afternoons letting their imagination run wild with it.

Joanne, is this floor something you will ever need to pull back up - to access wiring or perhaps change out the flooring? If it is going to be permanently installed, I've always had great success using Aleene's tacky glue. I make wood floors using skinny sticks glued to cardstock templates. Once I have my floor finished & stained I spread glue over the house floor and then set the completed flooring template in. The tacky glue doesn't dry on contact (if you use enough) so you have a few minutes to make any adjustments in positioning. Once I have the floor in place I weigh it down - covering the entire floor with something weighty (books, covered bricks, anything heavy enough to weigh it down and cover the entire floor) and let it dry overnight. I've never had a problem with the floor trying to lift after doing this. The trick is making sure you spread a thin layer of glue on the entire wood floor surface that you'll be covering with your flooring template & making sure you have it weighed down while the glue dries Having never built a half scale buttercup, I don't if there's enough room to weigh the floor down, unless you have something small & heavy that would fit in the smaller house (I've only done this in 1/12 scale houses & roomboxes). This also isn't a good way to do it if you think you might ever need to remove the floor in the future. Speaking from experience, it's a real monster to get the floor back up after gluing it this way (at least it was for me) Lisa

Another welcome from Washington (Kitsap County) here!

Good morning Vanessa & welcome to the mini family! Nice to see another Washington miniaturist here!

lol! I've actually done this

This is my usual way of adding to my collection too! Some of the bigger ones that I've found on Craigslist, I've had to get his help to go get and for the most part he humors me. Keeps me busy so he doesn't have to entertain me. On the rare occasion that he makes a little negative noise about my getting another house I just remind him that I won't hassle him about his obsession, I mean hobby, if he doesn't bother me about mine. And that's typically enough to quiet him down

Probably won't happen for a bit, but the very next kit I get will definitely be the Glencroft. I've been eyeing it for awhile and already can picture in my mind all sorts of things I want to do with it. But I have to finish up a few other projects first. I'm planning to put it on my wish list for next Christmas, if I don't get it myself before then.

Thanks for asking for our input Dean! To tell the truth, I don't even remember if siding & shingles came with the kits I've done, but if they did, they were re-purposed for something else because I used paper clay on the exteriors of my Adams and Sugarplum. I echo the sentiments that siding & shingles are a nice perk when they are included, but not necessary components because so many people opt to cover their house exteriors in different ways. If people opt to use them, they could be an addition to their purchase order.

Thanks Holly. I have built (and or purchased) several Greenleaf kits - the Adams, the Sugarplum, Westville, and Magnolia and I've loved them all. Two of them are on permanent display in my bedroom. This time I'm wanting to do a side-open house for eventual display reasons (I'm running out of room ), thus my interest in either building or bashing a kit that will give me the dimensions I'm after.

Thanks Lawanda!

Thanks Mike! The decorated sample is what was throwing me off. Holly, thanks for the info on the Greenleaf dormers. Originally I had planned a 4-room cottage & did up drawings for having the shell pieces cut, but that plan fell through as the gentleman that was going to do the cutting got a new job & doesn't have time now to take on this small job. I can't cut a straight line to save myself (can't really draw a straight line either, unless it's on graph paper! lol ). So as an alternative I've been looking for kits that might be bash-able and I thought this one might do if I got two of them & put them back to back (the idea is for a side-open cottage).

I'm hoping someone can answer a few questions about the kit. Can someone tell me what the dimensions of the inside (floor space) is? The overall dimensions of the kit on their site say it is 11 7/8 wide by 12 1/8 deep but I'm assuming they've included the wall thickness & roof overhang in those dimensions & I'm trying to figure out if the floor space would be large enough for what I want to do. Second question - is the roof a 45 degree pitch/angle that would work with a dormer? In one picture on their site it appears to be a 45 degree pitch but in the other - not so much. Thanks for any help you can provide!