Search the Community

Showing results for tags 'door'.

Found 15 results

  1. From the album Queen Anne Row ACP

    single door is Bespaq but double door seems to be a rarity.  Mountain Miniatures claims no double door was ever made.
  2.   This is a highly detailed Window ready for your dollhouse. Made of white PLA.   Measures 3.18 x 5.27 x 0.59 Opening is 3 1/4" x 2 1/8" Print Time: 1hrs - 51min   Can be found here: All of my items are created on a 3D Flashforge Creator Pro Printer. They are printed at 200 microns resolution which is very detailed.This item is sold unpainted. This way you can add your own touch to your piece. This item is designed for 1/10 – 1/12 scale.
  3. 58574c0db4e4f-newdoor.jpg

    From the album Glencroft

    © Aaron Cameron

  4. Sliding barn door handles

    From the album 2014 HBS Creatin' Contest--Erabliere Aucoin, Sugar Shack and Shop

    These handles are made from the same (RL) specialty picture-hanging nails that were used, when spray-painted a plasticky white, for bottlecaps on many of the maple syrup bottles and jugs inside, in the shop's stock. Lovely multitaskers, these things.
  5. Dry fit of the door and trim.

    From the album Bayberry Craftsman

    Porch floor is finished and the door is dry fitted. Some modifications needed to be made to the door assembly but it wasn't too bad.
  6. Shutters & Door

    From the album My Arthur: Santa's House

    After thinking about it for a few days, I came up with this mirror image design for the shutters. Luckily, the same design fit in the panels on the front door too! Door isn't finished yet - still needs glass and final gluing.

    © Lene Pieters

  7. 1:24 Tennyson Bash

    From the album #1 Tennyson Place, a 1:24 Tennyson Bash

    My initial plans for the door for this house went sideways when my supplier didn't ship the door I'd ordered, so I looked at how I might make do. I had this door in my half scale stash, but it was glued closed and I really prefer doors open. So after several short turns in the microwave (10 seconds per) I gradually, carefully got it apart without too much damage. I've sanded all the old glue off and repaired one small split off piece. When I reassemble it, I will pin hinge it so that it will open.
  8. Veneer sheet & cardstock door

    From the album My First Rehab Project - Jewel

    My first attempt at building a door , the veneer sheets are really easy to work with . I think on the next one I'll use cardboard instead of cardstock to make it a little bit thicker.
  9. From the album The Steampunk House

    This is a close-up of the Kitchen. The walls are scrapbooking paper, except for the door which is painted bass wood. The floor was made by cutting baked Polymer clay sheets into tile pieces that I glued to graph paper and sealed with polyurethane. With the exception of the tea kettle, everything in this photo was hand made out of some of the following; Egg cartons Popsicle sticks Bass/balsa wood Various papers/cardboard Polymer clay Plastic bottle tops Pipe cleaners Craft foam Aluminum wire Rocks/sticks from outside Beads Fabric Glass mosaic pieces Acrylic paint Polycrylic Read about the whole project and see more photos on my blog;

    © Kyle Lefort 2013

  10. Steampunk House Bedroom Door Detail

    From the album The Steampunk House

    The Steampunk House, the end result of a lengthy blog challenge/contest. It was a quirky cabinet, but now it's a Steampunk themed dollhouse. How cool is that? This is a close-up of the Bedroom door. Materials; Bass/balsa wood Acrylic paint Polycrylic Other findings More info on my blog;

    © Kyle Lefort 2013

  11. MYOD H PH012

    From the album APEDOLLYs ORCHID D-HOUSE

    cabinet,pile of shingles,birdhouse dormer,front door