Search the Community
Showing results for tags 'sanding'.
-
Hello, I've been reading that a person should not sand before painting with at least a primer. But my half scale RGT Front-opening Country Victorian arrived so rough and I was getting splinters from handling it. Besides I heard that Brown paper can be used to sand a dollhouse and my kit arrived covered in the stuff. I thought it would be the best to kill two birds with one stone and I used the brown paper to sand it down. Some pieces are still a little tougher than I would have liked, but I just saw the recommendation that a person not sand until after painting a first coat. Did I ruin my kit? So concerned! Thank you!
-
Hi all:) I have quite a few pieces of vintage dollhouse furniture I’d like to refinish, but first I need to remove the old varnishes and stain. I tried swabbing some items with acetone nail polish remover, it worked somewhat- not as well on pieces that had layers of thick varnish or a heavy dark stain. I have used sandpaper , but it’s very difficult to get into the cracks and crevices of tiny turnings or carved detail. Both methods were messy and a bit time consuming, with okay results. I keep thinking there has to be a better way! Any suggestions?
- 5 replies
-
- refinishing furniture
- sanding
- (and 2 more)
-
Hi there! I'm new to the world of miniatures, and building a house for my niece. Greenleaf Orchid seemed like a good first-timer house. So far, I'm completely obsessed, and love working on it. The only thing I'm struggling with is trying to find a faster way to sand all the parts. I've been looking at pen sanders, Dremels, and I'm not sure what's right for me. Any pointers? Thanks to all!
-
I dry fit the Laurel, then the primrose. I am adding rooms to the Laurel so it will have 6 rooms. I double decked/bashed two Primroses. I think I should have approached it differently, but I want the the floors to line up. I experimented with raw wood paint, sealer. I like it better because it has no odor. The Laurel is glued except for the roof. I'm adding dormers to the attic space. I am leaving out the room dividers for now, and I am going to reconfigure the stairs. Onward and upward!
-
- sanding
- punching out slots
-
(and 3 more)
Tagged with:
-
From the album: The Laurel Build
The emery board and taking this piece of sand paper off the sanding stick made it easier to adjust the slot size -
Hi all, I'm working on the Orchid (TMF) my first house in 31 years. I was thinking about putting the bottom partition in so that the kitchen is on the left. I thought about extending the bay window in for a small table. For those of you who've done this house, would that work?(i.e. proper height) I really don't want to put printed wallpaper on all of the interior walls, and I've heard that you shouldn't paint them, so can I put up solid color cardstock instead? I'd read some posts about scoring the floor and staining to look like floor planks, but my shell is already together. Could I make floor planks with craft (popsicle) sticks? I'm having a hard time sanding the edges of pieces to get them really smooth. They seem to be rough no matter what I do, and on some of the narrow trim pieces, some of the back layer has actually fallen off. Am I doing something wrong? Thanks!
-
From the album: silvrsky-Meagan Dollhouse
Sanded a ton!!! Then started priming everything! Got really sunburnt. Won an action on ebay for a cute sofa and chairs! -
I've started working on the Beacon Hill stairs. We don't have a real workshop area in our condo, so I'm working at a folding table with carpet on the floor. Sawdust was going here, there, and everywhere. In an effort to control it, I spread a white cotton dish towel on the table to work on. It seems to catch the sawdust and hold it until I'm ready to shake out the towel. I know some of you work in living and dining rooms and elsewhere in your homes. How do you control the sawdust?