100 2312
If you look to the right of the photo, you can see a bit how I made this. But I will describe it here. I cut a piece of wood flooring 3 strips wide and the width of the room. I used quilting thread and all those beads to make strings of various length on the middle flooring on the strip. I did not separate the wood strips. When done I lay it down and heavily glued along the inside of the wood strip, pulling up the slack in each string, and let it dry. Then I folded up the outer strips of flooring to make a squared U. Then I got a wood U piece (square edges and shape) the same length. I painted it red, then painted it again with red nail polish. When both were dry I glued the bead U inside the wood U, heavily glued, weighted it so the beads stayed put and let it all dry overnight. Then I glued it to the ceiling with the box upside down, and weighted it until dry. I set it I the room at a slight angle. The smaller portion is Gypsy's work area and the larger section is the shop/store. I hope you can understand what I tried to explain here.
- 1
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.