Pocket door - lever mechanism built
Continuing work on the pocket door between the foyer and the kitchen, following KathieB's tutorial. I decided to use 1/4in thick wood for the inner connectors and pocket door mechanism instead of foam core board, using wood glue to create an especially strong bond. The reason for this is that the wall will serve as a structural wall and I want to cut down on the amount of give and warping it might have. Unlike Kathie's tab and slot house example, this wall just sits inside the house and will be glued at contact points only...so I need a straight, strong wall.
I asked Kathie what she would have done differently, and she said she wished she had built in a way to open and close the door from the outside, like a string. As it is, she has to reach in to show that it works, and that requires the removal of furniture. That got me thinking! How about a lever that comes out of an opening in the back of the pocket door wall. You would push the door closed and pull it open like a pop-up book. The lever itself could be hinged to lay flat when the door is open.
Even though there are tiny hinges on the market, I opted for a leather hinge instead. It's flexible and won't be damaged with some turning and bending the way a tiny metal hinge might be over time. I used brass brads for additional security after gluing the leather in place. To finish the lever, I added a sewing pin glued into the end.
Here the wall is just taped together since I have more finishing work to do before gluing it all together. The door mechanism needs to be treated gently, but it works!
- 1
Recommended Comments
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.