Jump to content
  • entries
    68
  • comments
    94
  • views
    14,904

Cowl Vents and a New Chimney!


Debra from Olde Cape Cod

265 views

Another really warm day here in the south. I was looking at the chimney with the cowl vent and decided I needed two cowl vents instead! Since the Neverwas haul inspired me, I wanted to have something similar plus provide more air flow through the Summerhouse. Fortunately, I had purchased two plumbing pieces so I had another one on hand. The first thing to do was drill out the threads with a paddle bit in a small drill press. DH helped me with this part as it actually took three hands to accomplish. blogentry-3022-0-19871100-1434994878_thu This made the walls a little thinner so that I could make the round opening more oval. I placed a clamp where I wanted it and heated the piece with my blow dryer. After a dunk in cold water, it held it's shape. It took a few times, but was finally close to what I wanted. blogentry-3022-0-58980600-1434994896_thu The next step was to cut a piece of plastic canvas roughly the shape of the opening. Then it was trimmed and adjusted until it fit. This piece was set aside until later. blogentry-3022-0-43432000-1434994926_thu The interior was painted with two coats of flat black.
The chimney had to be larger now to accomodate two cowl vents. I found a piece of 2X4 in my husband's shop and brought it in and measured and traced the roof pitch onto the piece of wood. DH cut it on his bandsaw and it fit just right! blogentry-3022-0-35655200-1434994940_thu
I cut out a piece from scrap wood for a chimney top and added the shirt cardboard "sheet metal". Also cut a couple of 1/4" strips of the same cardboard to make circles to hold the plumbing piece cowl vents. blogentry-3022-0-87260000-1434994956_thu The next step gave the Captain pause....I glued on bling! LOL! blogentry-3022-0-10731300-1434994970_thu He walked off saying he just couldn't watch anymore. But, there is a method to my madness! Right now I have to let paint and glue dry, so this will continue tomorrow! Have a great day all!

1 Comment


Recommended Comments

Guest
Add a comment...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...